- Type: Multi-purpose Fuel Stove
- Application Method: manual
- Applicable Seasoning Type: Solid Seasoning
- Piece Number Of Wind Deflector: <5
- Material: STAINLESS STEEL
- Number of Users: 3-5
- Structure: SPLIT
- Usage Condition: Normal Outdoor
- Fuel: FireWood
- With Ignition Device or Not: Not Included
- Disposable: No
- Brand Name: Xbees
- Origin: Mainland China
- Certification: CE
- BBQ grill: camping barbecue
- charcoal stove: portable camping stove
Front And Rear Gasification Combustion
Visual Glass Door Design
Safe And High Temperature Resistant Glass
Multiple Modes Are Available:
Cooking Mode
Barbecue mode
Type A — Steel Plate
Type B –304 Stainless Steel
Preferred Baking Net
304 Stainless Steel Grill Mesh
Health And Safety
Internal Thickness 2mm
The Outer Net Thickness Is 4mm
Small Body
Easy To Carry
Type A – The Steel Plate 12.7KG
Type B –304 Stainless Steel 10.3KG
Vehicle-mounted Convenience
It Doesn’t Take Up Space In The Trunk
Size Of Fire Arbitrary Control
Fire Size Can Be Controlled By Pushing And Pulling The Scissors Indicated In The Picture
Furnace Body Analysis:
1. Chimney 7. Ring Cover
2. Cigarette Pack 8. Add Wood
3. Storage Panel 9. Feed Port Valve
4. Handle 10. Ash Extraction
5. Glass Windows 11. Tripod
6. Detachable Stove Top
Product Size:
Free Accessories:
Type A — Steel Plate:
1. Detachable furnace surface (steel plate)
2. 304 Stainless steel grill net
3. Screw pack
4. Furnace bridge
5. Cigarette Pack (steel plate)
6. Fire hook
7. Storage panel (steel plate)
8. Handle
9. Ash Extraction (steel plate)
10. Foot Rack (steel plate)
11. Chimney 5 sections 33cm/ section diameter 7.6cm
Type B –304 Stainless Steel
1. Detachable furnace surface (steel plate)
2. 304 Stainless steel grill net
3. Screw pack
4. Furnace bridge
5. Cigarette Pack (Stainless steel)
6. Fire hook
7. Storage panel (stainless steel)
8. Handle
9. Ash Extraction (Stainless steel)
10. Tripod (Stainless steel)
11. Chimney 5 sections 33cm/ section diameter 7.6cm
Details Show:
1. Gasification Combustion Hole
Gasification combustion, reduce Mars, energy saving and emission reduction
2. Sheet Metal Design
Not easy to deform
3. Visible High Temperature Resistant Glass Door
High temperature resistant glass, safe and durable
1. Furnace Depth: 18.5cm
2. Thickness Of Furnace Body:
The thickness of the furnace surface is 1.6mm
The furnace body thickness is 1.6mm
The feeding door is 1mm thick
Size At Storage Time
Installation Procedure:
1. Check whether accessories are complete
2. Turn the furnace body upside down and align the leg hole with the screw hole of the furnace body
3. Tighten the screws
4. The tripod is installed
5. Install handle to furnace arm
6. Place the storage panel on the handle
7. Adjust the strip below the cigarette pack to the level state
! ! ! Note: The cigarette pack must be stuck into the stove and pressed upward as hard as possible
8. Press the cigarette pack and rotate the card (rotate in the direction of the arrow in the figure).
9. The cigarette pack is installed
10. Put in the furnace bridge
11. Cover stove top/grill net
12. Install the chimney
13. stainless steel furnace bridge installation method: less holes put inside, porous must be put outside near the position of adding wood
Adding Wood Mouth Glass Installation Steps:
1. Prepare glass, clamp, screws and nuts
2. Take out a card
3. Align the strip with the hole above the feed port (be sure to look like the picture)
4. Fasten the screws and nuts to the upper and lower holes
5. Install the glass and keep it in place
6. Install the other strip
7. The glass is installed
Product Shooting Display:
Reviews
There are no reviews yet.